S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...
Edmonton West: +1 (780) 489-6663
NEW HOURS: MON-FRI 9-6 | SAT 9-5 | SUN 11-4
Edmonton North: +1 (780) 406-7030
NEW HOURS: MON-WED, FRI 9-6 | THU 9-7 | SAT 9-5 | SUN 11-4
Calgary: +1 (403) 520-7658
NEW HOURS: MON-SAT 9-5 | SUN 11-4
Proudly Canadian
ALL PRICES IN CAD

S2K Commerce - Order Entry

Actions
Loading...
1 - 24 of 90 ▶|
View:
 
Description
Price
Quantity
P-Series rod bearings are the oldest members of the Mahle 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Mahle P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
Item#:
362-CB1413P-AM
Manufacturer Item:
CB-1413P
Manufacturer:
Mahle
Avail #:
In Stock
12.7157
9.45
EACH
P-Series rod bearings are the oldest members of the Mahle 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Mahle P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
Item#:
362-CB1413P25MM-AM
Manufacturer Item:
CB-1413P-.25mm
Manufacturer:
Mahle
Avail #:
Out Of Stock
12.7157
9.45
EACH
P-Series rod bearings are the oldest members of the Mahle 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Mahle P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
Item#:
362-CB1633P-AM
Manufacturer Item:
CB-1633P
Manufacturer:
Mahle
Avail #:
In Stock
23.3209
18.02
EACH
Mahle H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Mahle P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface. Bearing Usage:Performance Engine Crankshaft Undersize (in):Stock Engine Crankshaft Undersize (mm):Stock Bearing Material:Tri-metal, TM-77 Dowel Pin Hole:No Narrow Bearing:No Quantity:Sold individually.
Item#:
362-CB1805H
Manufacturer Item:
CB-1805H
Manufacturer:
Mahle
Avail #:
In Stock
46.6523
37.09
EACH
Mahle H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Mahle P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface. Bearing Usage:Performance Engine Crankshaft Undersize (in):0.001 in. Engine Crankshaft Undersize (mm):0.025mm Bearing Material:Tri-metal, TM-77 Dowel Pin Hole:No Narrow Bearing:No Quantity:Sold individually. Notes:Provides .001 in. extra oil clearance.
Item#:
362-CB1805HX
Manufacturer Item:
CB-1805HX
Manufacturer:
Mahle
Avail #:
In Stock
48.7733
38.95
EACH
P-Series rod bearings are the oldest members of the Mahle 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Mahle P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application. Bearing Usage:Direct replacement Engine Crankshaft Undersize (in):Stock Engine Crankshaft Undersize (mm):Stock Bearing Material:TM-77 Dowel Pin Hole:No Narrow Bearing:No Quantity:Sold individually.
Item#:
362-CB1805P
Manufacturer Item:
CB-1805P
Manufacturer:
Mahle
Avail #:
Out Of Stock
22.2603
17.00
EACH
P-Series rod bearings are the oldest members of the Mahle 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Mahle P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
Item#:
362-CB1814P-AM
Manufacturer Item:
CB-1814P
Manufacturer:
Mahle
Avail #:
In Stock
27.5629
21.43
EACH
P-Series rod bearings are the oldest members of the Mahle 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Mahle P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
Item#:
362-CB1869P-AM
Manufacturer Item:
CB-1869P
Manufacturer:
Mahle
Avail #:
In Stock
29.6839
23.52
EACH
P-Series rod bearings are the oldest members of the Mahle 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Mahle P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application. Bearing Usage:Direct replacement Engine Crankshaft Undersize (in):Stock Engine Crankshaft Undersize (mm):Stock Bearing Material:TM-112 Dowel Pin Hole:No Narrow Bearing:No Quantity:Sold individually.
Item#:
362-CB1873AP
Manufacturer Item:
CB-1873AP
Manufacturer:
Mahle
Avail #:
In Stock
16.1916
13.49
EACH
P-Series rod bearings are the oldest members of the Mahle 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Mahle P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application. Connecting Rod Bearing Set-Ford 6.7L Diesel
Item#:
362-CB1953AP
Manufacturer Item:
CB-1953AP
Manufacturer:
Mahle
Avail #:
In Stock
29.6839
23.35
EACH
Mahle P-Series main bearings are the oldest members of the Mahle 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Mahle P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
Item#:
362-MS2034P
Manufacturer Item:
MS-2034P
Manufacturer:
Mahle
Avail #:
In Stock
184.5199
149.67
EACH
Mahle H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance. Bearing Usage:Performance Engine Crankshaft Undersize (in):Stock Engine Crankshaft Undersize (mm):Stock Grooved Bearing:Yes Groove Location:Upper Groove Style:1/2 Bearing Material:TM-77 Quantity:Sold as a set. Notes:Does not include thrust washer set.
Item#:
362-MS2218H
Manufacturer Item:
MS-2218H
Manufacturer:
Mahle
Avail #:
In Stock
238.6065
193.62
EACH
Mahle P-Series main bearings are the oldest members of the Mahle 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Mahle P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings. Bearing Usage:Direct replacement Engine Crankshaft Undersize (in):Stock Engine Crankshaft Undersize (mm):Stock Grooved Bearing:Yes Groove Location:Upper Groove Style:1/2 Bearing Material:TM-77 Quantity:Sold as a set.
Item#:
362-MS2218P
Manufacturer Item:
MS-2218P
Manufacturer:
Mahle
Avail #:
In Stock
133.6149
108.13
EACH
Mahle P-Series main bearings are the oldest members of the Mahle 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Mahle P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings. Bearing Usage:Direct replacement Engine Crankshaft Undersize (in):Stock Engine Crankshaft Undersize (mm):Stock Grooved Bearing:Yes Groove Location:Upper Groove Style:1/2 Bearing Material:TM-77 Quantity:Sold as a set.
Item#:
362-MS2223P
Manufacturer Item:
MS-2223P
Manufacturer:
Mahle
Avail #:
Out Of Stock
111.2590
92.72
EACH
Mahle P-Series main bearings are the oldest members of the Mahle 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Mahle P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings. Bearing Usage:Direct replacement Engine Crankshaft Undersize (in):Stock Engine Crankshaft Undersize (mm):Stock Grooved Bearing:Yes Groove Location:Upper Groove Style:1/2 Bearing Material:TM-77 Quantity:Sold as a set.
Item#:
362-MS2269P
Manufacturer Item:
MS-2269P
Manufacturer:
Mahle
Avail #:
In Stock
181.3384
147.26
EACH
Mahle P-Series main bearings are the oldest members of the Mahle 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Mahle P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings. Bearing Usage:Direct replacement Engine Crankshaft Undersize (in):0.010 in. Engine Crankshaft Undersize (mm):0.25mm Grooved Bearing:Yes Groove Location:Upper Groove Style:1/2 Bearing Material:TM-77 Quantity:Sold as a set.
Item#:
362-MS2269P25MM
Manufacturer Item:
MS-2269P-.25mm
Manufacturer:
Mahle
Avail #:
In Stock
181.3384
147.26
EACH
Mahle H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance. Bearing Usage:Performance Engine Crankshaft Undersize (in):Stock Engine Crankshaft Undersize (mm):Stock Grooved Bearing:Yes Groove Location:Upper Groove Style:1/2 Bearing Material:TM-77 Quantity:Sold as a set.
Item#:
362-MS2328H
Manufacturer Item:
MS-2328H
Manufacturer:
Mahle
Avail #:
Out Of Stock
257.6958
209.56
EACH
Mahle P-Series main bearings are the oldest members of the Mahle 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Mahle P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings. Bearing Usage:Direct replacement Engine Crankshaft Undersize (in):Stock Engine Crankshaft Undersize (mm):Stock Grooved Bearing:Yes Groove Location:Upper Groove Style:1/2 Bearing Material:Tri-metal, TM-77 Quantity:Sold as a set.
Item#:
362-MS2328P
Manufacturer Item:
MS-2328P
Manufacturer:
Mahle
Avail #:
Out Of Stock
86.0775
71.73
EACH
Mahle camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor. Bearing Usage:Direct replacement Bearing Material:B1 Cam Bearing Oversize (in.):Stock Cam Bearing Oversize (mm):Stock Grooved Bearing:Yes Groove Style:Full Engine Block Align Bored:No Quantity:Sold as a set.
Item#:
362-SH1996S
Manufacturer Item:
SH-1996S
Manufacturer:
Mahle
Avail #:
In Stock
59.3785
46.93
EACH
Mahle camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor. Bearing Usage:Direct replacement Bearing Material:B-1 Cam Bearing Oversize (in.):Stock Cam Bearing Oversize (mm):Stock Grooved Bearing:Yes Groove Style:Full Engine Block Align Bored:No Quantity:Sold as a set of 5.
Item#:
362-SH1999S
Manufacturer Item:
SH-1999S
Manufacturer:
Mahle
Avail #:
In Stock
150.5833
121.58
EACH
Mahle thrust washer bearings are available for a variety of engine configurations and engines to suit your vehicle's needs. They are manufactured from quality materials and install in the factory location with no modifications. Bearing Usage:Direct replacement Bearing Material:TM-77 Quantity:Sold as a set of 3.
Item#:
362-TW610S
Manufacturer Item:
TW-610S
Manufacturer:
Mahle
Avail #:
Out Of Stock
33.9260
26.09
EACH
Item#:
273-99805
Manufacturer Item:
99805
Manufacturer:
Howards
Avail #:
Special Order
223.9611
187.14
EACH
Item#:
481-16910.02
Manufacturer Item:
16910.02
Manufacturer:
Omix-ADA
Avail #:
Special Order
14.9900
11.99
EACH
Item#:
481-16910.03
Manufacturer Item:
16910.03
Manufacturer:
Omix-ADA
Avail #:
Special Order
32.9900
26.99
EACH
1 - 24 of 90 ▶|
View: